3m adhesive structural

Structural adhesives

that hold so well that the joint is stronger than the actual substrate

3m adhesive spray aerosols

Aerosols

3m adhesive cyanoacrylates

Cyanoacrylates

3m adhesive sealants silicone

Sealants and Coatings:

silicone, polyurethane, hybrid

3m adhesive contact

Contact:

water-based and solvent

3m adhesive anaerobic

Anaerobic

3m adhesive ultraviolet cured

Ultraviolet cured

adhesive thermofuses

Thermofuses

Liquid adhesives

We have a wide range of industrial adhesives useful for various applications

Structural. It can be based on epoxy, acrylic and polyurethane which allows it to have great mechanical, chemical and thermal resistance. This type of adhesive is an excellent alternative to mechanical fixing and can be used on various materials such as: aluminum, glass, wood, ceramics, metals, composites, rubber, PVC, polyethylene and polypropylene.

Aerosol sprays. No special requirements are needed such a squeezes or brushes and Its wide compatibility on different materials such as: fiberglass, polyethylene, polypropylene, wood, agglomerates, felts, cork, polycarbonates, ABS, foams, fabrics, metals, leather, paper, cardboard, expanded polystyrene and glass.

Cyanoacrylates. The main advantage of cyanoacrylates is the instant bonding of different materials such as metals, wood and plastics.

Sealants and coatings. It can be silicone based, polyurethane or acrylic. It is used to prevent the penetration of air, dust, gas, noise, smoke and liquids. You can get sealing and bonding, so It can be applied in materials such as: glass, marble, steel, aluminum, wood, etc. …

Contact. This kind of adhesive would be water based (usually current adhesive was solvent based) anyway the evaporation of water or solvent make easier the adhesion of both surfaces. Notice that at least one of the surfaces on which it is applied must be porous. This kind of adhesives could have a lot of advantages, and the water based ones does not cause damages to the Health and are not non-flammable. The versatility of these adhesives is one of the best advantages.

Anaerobic. It is usually in the metallurgical industry to avoid screws taking out due to the vibrations, it can also be used to seal joints in electronic applications or applications which we need to prevent corrosion, shear and vibrations.

Curing by ultraviolet. This kind of solvent-free adhesive is able of curing, solidifying or hardening when exposed to a source of ultraviolet radiation with a well-defined wavelength and intensity in a few seconds so they are widely used in different sectors such as: automotive, Construction, electronic and medical.

Heat activatable. Also known as hot glue or polyester, it is a solid glue designed to be melted using a gun so it is not recommended for using on temperature´s sensitive materials. This kind of adhesive can be used for assemblies, fillers, encapsulated and as an alternative method to mechanical fastening.